Looking for a General Contractor in Parkland? Dellamano Construction Is Ready.

Dellamano Construction Inc. serves homeowners and businesses in the Parkland area with full-scope construction — from kitchen remodels and room additions to complete ground-up builds.

One crew, one point of contact, and a track record of permitted, finished projects across South Florida.

What a Local General Contractor Actually Does for You

A general contractor is the person — or company — responsible for turning a set of plans into a finished structure. That means pulling permits, coordinating subcontractors (plumbers, electricians, framers, tile setters), ordering materials on schedule, and making sure every phase passes inspection before the next one starts.

Dellamano Construction manages all of that in-house coordination so you don't have to chase down six different trades yourself. Whether the project is a master bath renovation, a garage conversion, or a full addition, we scope the work, set a realistic timeline, and hold every sub accountable to it.

For homeowners comparing bids, the value of a GC isn't just labor — it's scheduling, liability, and a single person whose name is on the permit and whose reputation is on the line.

  • Permit application and inspection coordination
  • Subcontractor sourcing, vetting, and scheduling
  • Material procurement and site logistics
  • Budget tracking and change-order documentation
  • Final walkthrough and punch-list completion

Serving the Parkland Area: What Local Construction Actually Requires

Building in South Florida — and Parkland specifically — isn't the same as building anywhere else. The region sits in a high-velocity wind zone, which means structural components, window ratings, and roofing systems must meet Florida Building Code wind-load requirements, not just generic national standards. Permit reviewers here know the difference, and inspectors will flag shortcuts.

Homes in lower-elevation or flood-prone ZIP codes in Broward County frequently require elevation certificates before a permit is issued and may trigger FEMA floodplain requirements that affect foundation design. Dellamano Construction accounts for these at the estimate stage — not as a surprise after demo has started.

Parkland's master-planned neighborhoods also carry HOA architectural review requirements on top of municipal permits. Exterior changes — additions, new driveways, fence lines, facade alterations — typically need HOA approval before the city permit can move forward. Skipping that step is one of the most common reasons local renovation projects stall.

  • Florida High-Velocity Hurricane Zone (HVHZ) structural compliance
  • Broward County floodplain and elevation-certificate requirements
  • HOA architectural review coordination for exterior projects
  • Energy code compliance (Florida's energy code is stricter than the federal baseline)
  • Impact-rated windows and doors required in most South Florida remodels

Common Projects We Take On

No two projects are identical, but the scope of work Dellamano Construction regularly handles falls into a few familiar categories. Kitchen and bathroom remodels are the most frequent — structural wall changes, new plumbing rough-ins, tile, cabinetry, and electrical panel upgrades when the existing service can't support modern appliances.

Room additions and second-story expansions are a growing category in Parkland, where lot sizes limit outward expansion and homeowners prefer to build up rather than move. These projects involve engineering drawings, soil reports in some cases, and a longer permit timeline — typically 8 to 16 weeks from submission to first inspection approval in Broward County.

Commercial tenant improvements are also part of the portfolio — office buildouts, retail fit-ups, and light industrial spaces where ADA compliance and commercial fire code add layers that residential work doesn't require.

  • Kitchen and bathroom remodels
  • Room additions and second-story expansions
  • Garage conversions and ADU buildouts
  • Whole-home renovations
  • Commercial tenant improvements and office buildouts

How to Choose the Right General Contractor in Parkland

The lowest bid is rarely the full picture. When comparing general contractors in South Florida, the questions that matter most are: Is the license current and in the contractor's name (verifiable on the Florida DBPR lookup)? Do they carry general liability and workers' comp — and will they provide the certificates before work starts? And do they have verifiable completed projects in the same permit jurisdiction you're working in?

Dellamano Construction carries active state licensing and full insurance, and our completed projects are on file with Broward County's permit records — publicly searchable. We provide certificates of insurance directly to homeowners or HOAs before any work begins.

If you're gathering multiple quotes, we're happy to explain line by line what's included in ours and what's not. Scope gaps between bids are usually where unexpected costs appear later.

  • Verify the contractor's license at Florida DBPR (myfloridalicense.com)
  • Request a certificate of insurance naming you as additional insured
  • Confirm who will actually be on-site daily — the GC or a sub
  • Ask for permit history in your specific city or county
  • Get the payment schedule tied to inspection milestones, not calendar dates

Common Questions

How much does it cost to hire a general contractor for a home addition in South Florida?

Room additions in Broward County typically run $200–$350 per square foot for finished space, depending on structural complexity, finish level, and whether impact windows and energy-code upgrades are required. That range includes permits, labor, and materials but not furniture or appliances. The best way to get an accurate number is a site visit — call Dellamano Construction to schedule one.

How long does a permit take in Parkland or Broward County before construction can start?

For residential remodels, Broward County permit review currently runs 4 to 10 weeks depending on project type and whether third-party plan review is used to expedite. Full additions with engineering drawings can run 10 to 16 weeks. Your GC should factor this into the project timeline before you commit to a start date — we build permit lead time into every schedule we present.

Do I need a general contractor, or can I act as my own owner-builder?

Florida law allows homeowners to pull permits as owner-builders for their primary residence, but it comes with real risk: you become personally liable for code compliance, you must manage and vet every subcontractor, and the work may not be covered by your homeowner's insurance if an incident occurs. For projects beyond cosmetic upgrades — anything structural, electrical, or involving a permit — most homeowners find that the coordination alone justifies hiring a licensed GC.

Ready to Talk About Your Project?

Tell us what you have in mind — we'll come out, take a look, and give you a straightforward scope and estimate with no pressure.

General Contractor Serving Parkland, FL — Full-Scope Builds, One Point of Contact

Dellamano Construction Inc. handles permitted remodels, room additions, new construction, and commercial buildouts across Parkland and Broward County — from the first plan review to the final punch list.

What Building in Parkland, FL Actually Demands

Parkland sits inside Broward County's jurisdiction, which means every permit flows through the City of Parkland's Building Division and must align with the Florida Building Code's High-Velocity Hurricane Zone structural requirements. Window and door openings on exterior walls require impact-rated assemblies or an approved shutter system — not just standard double-pane glass — and that spec has to be confirmed at permit submission, not during framing.

Parkland's master-planned communities — including Heron Bay, Tall Pines, and Century Village-adjacent corridors — layer HOA architectural review on top of city permits. Any exterior alteration, from a new addition footprint to a driveway expansion, typically needs written HOA approval before the city will issue a building permit. Missing that step is one of the most common reasons projects in this area stall after demo has already started.

Broward County also requires elevation certificates for homes in low-lying or FEMA-mapped flood zones, and those certificates can affect foundation design requirements. Dellamano Construction addresses these variables at the estimate stage so the scope and budget reflect actual permitting conditions, not a best-case scenario.

Projects We Handle for Parkland Homeowners and Businesses

The work Dellamano Construction takes on in Parkland spans residential and commercial scopes. On the residential side, kitchen and bathroom remodels are the most common starting point — structural wall changes, updated plumbing rough-ins, new electrical circuits, and finish work coordinated under one permit. Room additions and second-story expansions are a growing category here, where larger lot sizes in some neighborhoods allow outward expansion while others require building up to stay within setback limits.

On the commercial side, tenant improvements, office buildouts, and healthcare facility work require a different permit pathway — commercial mechanical, electrical, and plumbing inspections run separately from the general building permit and have to be sequenced correctly or final occupancy gets held. Dellamano manages that coordination directly so the schedule doesn't slip waiting on a sub who missed an inspection window.

New construction and exterior work — covered patios, window and door replacements, structural remodeling — round out the typical project list. If a scope requires a licensed trade, the coordination happens in-house, not farmed out to whoever is available.

Common questions

How long does a permitted addition or remodel typically take to get approved in Parkland?
Permit timelines in Broward County vary by scope. A straightforward interior remodel without structural changes can move through plan review in two to four weeks. A room addition or second-story expansion with engineering drawings typically runs eight to sixteen weeks from submission to first inspection approval. HOA review adds time on top of that if the project touches the exterior — factor that in before setting a start date.
Do I need a general contractor for a bathroom remodel in Parkland, or can I manage subs myself?
Florida law requires a licensed contractor to pull permits for most structural, plumbing, and electrical work. If you self-manage unlicensed subs or skip permits, the city can issue a stop-work order, require demolition of completed work, and flag the property when you sell. A GC pulls the permit under their license, coordinates inspections, and keeps the project legally compliant from start to finish.
What's the difference between a general contractor and a construction manager, and which do I need?
A general contractor typically takes on the contract for the full build and is directly responsible for delivering the finished project. A construction manager provides oversight and coordination but the owner may hold individual trade contracts. For most residential remodels and additions in Parkland, a GC is the practical choice — one contract, one license on the permit, one point of contact when something needs to be resolved on-site.

Ready to Talk Through Your Parkland Project?

Bring your plans, a rough scope, or just a list of what you want changed — a walkthrough and honest assessment is the starting point for every project.

Call (561) 654-7243

Text Aldo Call the office